
Dragon60 Case
A 60% keyboard case with a feather-textured finish, triple mounting styles in the box, and a ball-catch quick-release that opens without tools. Ships with a free FR4 plate cut for the Wooting 60HE family.

Opens without a screwdriver.
A magnetic ball-catch structure keeps the top frame locked flush to the bottom during use — and pops apart in seconds when you want to swap the plate, adjust the gasket setup, or re-tune the sound. No screws, no fuss, no tools required.

A texture that catches the light.
An etched feather pattern runs across the top plate — a subtle, tactile finish that catches light differently from every angle. The look ties into the Dragon Divinity series identity without shouting.
Tune the typing feel to your hand.
Dragon60 ships with the hardware for three complete mounting styles — swap between them anytime to change how the plate feels under your fingers.

Leaf-Spring Gasket
Long leaf-spring arms cushion the plate with a soft, springy bounce — the most flexible, most cushioned option of the three.
Silicone Gasket
Silicone gasket beads give a firmer, more consistent bottom-out — clean, controlled, and quiet.
Bottom Mount
Plate seats directly to the bottom for the stiffest, most solid feel — the tightest sound profile of the three.
Ready for your Wooting 60HE.
Every Dragon60 case ships with a free FR4 plate cut to fit the Wooting 60HE, 60HE+, and 60HE v2 PCBs — drop your board in and start typing.
Full parts list.
- Acrylic light windows × 2
- KM2×4 screws × 4
- Damping foam, long × 6
- Silicone pads, short × 6
- Leaf springs × 6
- Leaf-spring silicone beads (short sleeve) × 6
- CM2×4 screws × 6
- Bottom washers × 8
- CM2×6 screws × 8
- Gasket silicone beads (long sleeve) × 8
Spec sheet.
| Layout | 60% · GH60 |
| Mounting styles | Leaf-spring gasket · Silicone gasket · Bottom mount |
| Disassembly | Magnetic ball-catch quick release (tool-free) |
| Top finish | Feather-texture pattern, black |
| Compatibility | Wooting 60HE · 60HE+ · 60HE v2 (FR4 plate included) · standard GH60 PCBs |
| Included plate | FR4 — cut for Wooting 60HE family |
| Max bottom foam | 1.5 mm total (custom-cut allowed within this limit) |
| Series | Dragon Divinity |
Case only — keyboard PCB, switches, and keycaps not included. For third-party GH60 PCBs, verify plate cutout before install.











