GDKlab NV60 Keyboard Case
A 60% aluminum keyboard case with a flowing marbled exterior, integrated RGB ambient underglow, and a free FR4 White Gold plate + full modding kit cut for the Wooting 60HE family and the standard GH60 61-key layout. Available in three colorways — PC, Silver, and Black. Tuned in-browser through a dedicated web driver.
- Flowing marbled top plate — a signature streak finish that catches light.
- RGB case ambient light — soft underglow, tunable in the browser.
- Wooting 60HE / HE+ / V2 · GH60 61-key — FR4 White Gold plate + modding kit included.
Streak finish that catches the light.
The top of every NV60 case carries a flowing streak pattern — every angle throws a different reflection, and no two cases look the same. Paired with a PC + knife-pattern steel plate on the front for a subtle, layered texture up close.
Underglow, not just per-key.
An integrated RGB ambient strip runs along the case, casting a soft halo around the board and onto the desk. Pairs cleanly with translucent keycaps for a full glow effect, or stays a subtle accent under solid caps. Colors, effects, brightness, and modes are all tuned through the web driver — nothing to download or install.
Open the NV60 Web Driver →Tune the case light in one click.
Configure the RGB ambient light directly from your browser at light.rdmctmzt.com — no installer, no companion app, no account required. Adjust color, brightness, and effect, and your changes save straight to the case.
light.rdmctmzt.com →Wooting 60HE and GH60 61-key.
Every NV60 case ships with a free FR4 White Gold plate cut to fit the Wooting 60HE, 60HE+, and 60HE v2 PCBs, as well as the standard GH60 61-key layout — plus a complete modding kit (bottom foam, sandwich foam, switch pad, PET sound pad). For other GH60 layouts, verify plate cutout before install.
PC
PC top case + Silver aluminum bottom. A two-material build — translucent polycarbonate up top over a silver aluminum base. The RGB underglow reads at its brightest through the PC top.
Silver
Full silver aluminum, top and bottom. The classic all-metal option — a clean brushed finish paired with the flowing streak top plate.
Black
Full black aluminum, top and bottom. The stealth option — deep matte black frame with the red N logo as the only accent.
Full parts list.
- NV60 case kit × 1
- FR4 White Gold plate × 1
- Modding kit × 1
(bottom foam · sandwich foam · switch pad · PET sound pad) - Screwdriver × 1
- M2×3 flat-head screws × 10
- M2×7 flat-head screws × 1
- Top silicone × 1
- Standoff × 1
- Steel-plate satellite stabilizers × 1 set
Case only — keyboard PCB, switches, and keycaps not included unless a bundle variant is selected. Compatible with Wooting 60HE / HE+ / V2 and standard GH60 61-key PCBs; for other GH60 layouts, verify plate cutout before install.